[ ] Cut 3 pieces from the 2x4 stud each 14” long. Make sure they are all exactly the same length.
[ ] Cut a piece 16¾” long from one of the 14” wide pieces for PANEL J. Remember the Building Tip in the planning section and the “Note about Dimensions”. This piece will become the panel labeled BOTTOM SHELF on the plans.
[ ] Screw the bottom shelf panel onto two of the 14” 2x4 studs you cut earlier as illustrated. Make sure the studs are flush on both ends and the sides. As you screw it down, be sure the assembly stays square. Use 3 screws on each side and screw the panel to the studs.
Next: Assembling the Frame
No comments:
Post a Comment