[ ] Take one of the 12” pieces and mount four l-brackets along the side edges. Test-fit the panel and mark where the brackets are. (see pictures)
Run two screws into the side panel to temporarily secure the COIN DOOR PANEL C into place. Remember not to glue it in place yet and use as few screws an necessary to hold it in place for test-fitting.
[ ] If you are going to install a coin acceptor, you should cut the mounting holes for it now.
Some coin acceptors that I have found that are small enough are from http://www.happcontrols.com. Some examples that should fit are:
40-0023-00P
40-0229-00
40-0168-00
40-1500-02
They range from around $30 for single slot and $65 for a double slot.
Next: Monitor/TV Shelf
No comments:
Post a Comment